Your shop is your brand. A hand-worked metallic floor turns every chair into a backdrop - and under the shine it is a seamless, dye-proof, water-proof commercial system that sweeps clean between every cut. We install over a weekend so you never lose a booked day.
A floor is only as good as what's under it. This is exactly what you're buying.
Every floor starts at bare, profiled concrete. We grind - never acid etch - so the system bonds mechanically to the slab instead of sitting on top of it.
Cracks, spalls and low spots are repaired and flattened first. In a shop full of mirrors and track lighting, every flaw in the slab would telegraph through - so none are left.
Every metallic floor we pour gets a dedicated MVB coat rated to 24 lbs per 1,000 sq ft per 24 hours. Wash stations put water on this floor daily - the slab under it stays sealed off for good.
100% solids metallic epoxy, poured and worked by hand with pigments from JP Resin and Torginol. The marbling never repeats - no other shop will ever have your floor.
A clear urethane top coat built for commercial traffic - it shrugs off hair dye, bleach, developer and barbicide, holds up under hydraulic chairs and rolling stools, and comes in the sheen you choose. Anti-slip additive available at wash stations.
A typical shop floor goes in over a weekend: we start after your last client Friday, and the floor takes foot traffic again before Monday's first appointment. For larger salons we phase the install station by station so you never close. Flake (from a fixed written quote) and solid color epoxy (from a fixed written quote) are available when you want the same durability with a different look or budget.
Every one of these is designed to the space and spec - we walk it, measure it, and give you a fixed written number. Commercial and municipal projects get itemized, bid-ready documentation.
“Evergreen Epoxy did a fantastic job on my garage and shop floors. From start to finish they were timely, professional, and it went exactly as they promised.”- Tobey Vos, Google review
“Very professional and knowledgeable. Will be recommending to my friends.”- Madison Muder, Google review
“Jack, Carson and crew did an amazing job. They were very responsive and professional.”- Craig B, Google review
No. The urethane wear coat is built for exactly this - dye, bleach, developer and barbicide wipe up without a mark, even if they sit for a while. That is a big part of why salons move off of sealed concrete, LVP and tile grout.
Yes. A typical shop floor goes in over a weekend - we start after your last client Friday and the floor takes foot traffic again before Monday morning. Larger salons can be phased station by station so you keep taking clients the whole time.
No. The system is 100% solids epoxy under a commercial urethane wear coat - hydraulic bases, rolling stools and rolling carts are everyday loads for it. Chair mats become a style choice, not a necessity.
One pass of a dust mop or squeegee. The floor is completely seamless - no grout lines, no plank edges, no transitions for hair and product to collect in. Daily cleanup takes minutes, and it photographs clean because it is clean.
Metallic runs including the standard moisture vapor barrier. Flake floors start at a fixed written quote and solid color epoxy at a fixed written quote if you want the same durability with a different look. Walkthroughs are free and the quote is a fixed written number.
Three quick steps - we reply within one business day, usually same day.